The Technical Seminar on Reference Frames in Practice will be held in Orlando 27-28 May 2023. The main focus is on reference frames in general with a specific focus on UN initiatives, global and regional frames as well selected national case studies.
You can register for the seminar via the registration form* for the Working Week. In case you have problems with your registration, please contact: FIGRegistration@conferencemanagers.com
SATURDAY 27 MAY
| 13:00 – 13:05 | Welcome and Opening Remarks | 
| Dr. Ryan Keenan, Chair, FIG Commission 5;
				 | |
| 13:05 – 14:00 | Session 1: International Geodesy Initiatives | 
| 1) ICG at UN 2) UN-GGIM Subcommittee on Geodesy and Education, Training, and 
				Capacity Building Working Group 3) IAG and the International GNSS Service | |
| 14:00 – 14:15 | Break | 
| 14:15 – 16:00 | Session 2: Introduction to Geodetic Reference Frames | 
| 4) Introduction to Geodetic Reference Frame Theory 5) Introduction to Vertical Reference Frames | |
| 18:00 - | Seminar Dinner | 
SUNDAY 28 MAY
| 08:00 – 10:00 | Session 3: IGS and OGC | 
| 6) Open Geospatial Consortium (OGC) Standards  7) Ginan – Open Source Analysis Centre Software from 
				Geoscience Australia  | |
| 10:00 – 10:15 | Morning Break | 
| 10:15 – 12:30 | Session 4: Case Studies I | 
| 8) One Pacific, One Map  9) United States: Development of a modernized NSRS in the 
				U.S.  | |
| 12:30 – 13:30 | Lunch Break | 
| 13:30 – 15:00 | Session 5: Case Studies II | 
| 10) Taiwan 11) Uruguay 12) The Philippines: NAMRIA challenges in PGD2020 13) Exploring the Lunar Reference Frame | |
| 15:00 – 15:15 | Break | 
| 15:15 – 15:55 | Panel Discussion | 
| Presenters from Session 4 & 5 | |
| 15:55 – 16:00 | Closing Dr Ryan Keenan, FIG Commission 5 Chair | 
| 16:30 - 18:00 | FIG Working Week 2023 - Opening Ceremony | 
| The opening ceremony will provide a spectacular introduction to the FIG Working Week, its theme, and its unique location – a festive start of the week. See - Opening | 
| Pre-event Sponsors | 
|  |  |