| 
  
     | 
	  Meet the President
  |  President Prof. Dr. Rudolf Staiger The FIG General Assembly elected at its 
		  meeting in Istanbul, Turkey in May 2018 Prof. Dr. Rudolf Staiger as FIG 
		  President for a four-year term of office 1.1.2019-31.12.20228    FIG celebrated this transition on 9 November 2018 in 
				  Athens, Greece at a joint celebration of FIG 140 anniversary 
				  and hand over ceremony. President Staiger will present the 
				  council work plan at the General Assembly 2019 in Hanoi, 
				  Vietnam. The picture shows President Rudolf Saiger together 
				  with four Honorary Presidents, from left Juha Talvitie, 
				  Finland, Bob Foster, USA, Chryssy Potsiou, Greece and Holger 
				  Magel, Germany.   Curriculum Vitae
        
          |  | Prof Dr. Rudolf Staiger Date of birth: 19 March 1956 Nationality: German Current position: Professor at the 
	  University of Applied Sciences Bochum, Dept. of Surveying Engineering and 
	  Geoinformatics.   |  Prof. Dr.-Ing. Rudolf STAIGER is 
				  teaching Surveying Engineering at the University of Applied 
				  Sciences in Bochum (Germany). His areas of special interest 
				  are instrumentation and calibration of geodetic sensors, Laser 
				  scanning and data analysis. He studied Geodesy in Karlsruhe 
				  (Germany, University of Karlsruhe) and in Paris (France, 
				  ENSG). The subject of his doctoral thesis is “close range 
				  triangulation with theodolites for coordinate measuring 
				  purposes”. Rudolf spent 6 years in industry with KERN and 
				  Leica-Geosystems (both in Switzerland) as Systems Engineer, 
				  Product Manager and Software Developer. From 1994 to 2005 he 
				  was teaching Surveying Engineering at the University of Essen 
				  (Germany). Since then he teaches in Bochum where he also 
				  served as Vice-President of the University for Research & 
				  Transfer (2009-2016). Rudolf is very active in FIG. He was the 
				  Chair of Commission 5 (Positioning and Measurement) and is 
				  currently acting as Vice-President. His language abilities are 
				  German, French and English. Education
				
				1990-1992: Bachelor of Business 
				Administration (BBA), Graduate School of Business Administration 
				(Zuerich, Switzerland) 
				1988: PhD on the theory of 
				“On-line-Triangulation” for Theodolite Measuring systems 
				1983–1987: Scientific Assistant at the Geodetic Institute 
				(University of Karlsruhe) 
				1976–1982 : Studies of geodesy at 
				the University of Karlsruhe (Germany) and Ecole Nationale des 
				Sciences Géographiques (ENSG, Paris-St.-Mandé, France)  ArticlesPhotos
					 
			 ContactsProf Dr. Rudolf SaigerProf. Rudolf Staiger
 Fachhochschule Bochum
 University of Applied Sciences
 FB Vermessungswesen und 
					Geoinformatik
 Lennershofstrasse 140 44801
 Bochum
 GERMANY
 Tel. + 49 234 32 10 547
 Email: rudolf.staiger 
					at hs-bochum.de
 
 |